Adjustable Guide Plates

Command Cam Kit

• Kit includes: hard weld cast cam, command spring kit with alum. retainers (4), hydraulic or solid lifters (4)

Command Piston Kit

• (2) Pistons - (2) Rods - Piston Rings - Wristpins - Clips - RB's

Twin Rods

• 4.395
• 4.495
• 4.545
• 4.585
• 4.635
• 4.843

Command Rod Bearings (set of 4)

Command Crankshaft

• 2.750 Billet
• 2.940 Billet
• 3.120 Billet

Steel Command Crank Gear

• Broached & Timing Mark

Roller Cams

• CNC Ground Any Lift & Duration
• Lobe Center Reverse & Non-Reverse Grinds Available

Cast Command Cams

• RPM Range: 3,600 - 5,000
• Need core for exchange.

Shaft Mounted Rockers

• 1.5-1.6-1.7 Includes Steel Pedestals

Roller Rockers Pedestal Type (set of 4)

• 1.5-1.6-1.7
• Includes Blots 5/16", Pedestals, Rockers

Command Adjustable Gear

Solid Lifters

• with .011 EDM Hole

Roller Lifters (set of 4)

• Tie Bar

Cast Cam Springs with Retainers (set of 4)

Command Stainless Steel Valves (set of 4)

• 1.320 - 1.170 Std.
• 1.320 - 1.170 .297 Longer
• 1.450 - 1.200 1.200 Std.
• 1.450 - 1.200 .297 Longer

Command Carb Reworked

• Core Is Required
• Rework & Large Throttle Bore
• Enlarge Venturi
• Rework Idle Circuit
• Rework Emulsion Tubes
• New Stack Design for CFM's
• New O-Rings
• New O-Rings
• New O-Rings

Valve Keepers 7mm (set of 8)

7mm Bronze Guides (set of 4)

7mm Seals

3/8" Push Rods (set of 4)

• 6.350-6.450-6.500-6.550-6.600-6.650
• Double Tapered for Rocker Clearance
• For Steel & Roller Cams Only
• .135" Wall Thickness

5/16" Push Rods (set of 4)

• .080 Wall Push Rods
• For Cast Cams Only
• 6.350 - 6.400 - 6.450 - 6.500 - 6.550 - 6.600

Steel Pedestal Mount (set of 2)

• For Stock Rockers.
• For Pedestal Mount Roller Rockers.
• For Shaft Mounted Rockers.

Billet Cam Springs

• Ti Retainers for Unlimted 270 Seat -495 over the nose
• Roller Cams Only

Command Needle Bearing

• Lakota Roller Cams Only
• Install In Side Cover

Dyna Coil Bracket

Dyna Coils & Bracket

Twin Cylinder Ignition Bracket

• Adjustable Timing with Modules
• Alum Ring
• Specify P.T.O. 1.125-1.250

Timing Pointers

Command Velocity Stack

• Includes Bolts

Command Valve Cover and Gasket Kit

P.T.O. Side Oil Seal

Command Kohler Dowel Locating Pins

Command 3/4" Valve Cover Spacers (set of 2)

Command Stud Kit

• Includes Studs & Nuts

5/8" Vertical Shaft Manifold Carb Adapter

Command Non-Adjustable Flywheel

Command Adjustable Flywheel

• For With Ring Gear.

Ex Flanges (set of 2)

Oil Filter Nipple

Command Side Cover Bearing & Oil Seal

Command Breather Reed

Command Breather Filter

Command Breather Gasket

Command Breather Retainer