We Accept Visa, Master Card and Discover.
 
Lakota Kohler Command Parts



Pictured: 5000 V Twin Motor

Command Steel Billet Crankshaft  -  $707.88
    * 2.640 stock stroke - 2.270 - 3.000 - 3.120 - 3.220
Replacement Command Broached steel Crank Gear  -  $45.00
    * works for stock cranks or M.S.C. stroker cranks
Woodruff Crank Keyway  -  $1.00
3/4" Crank Nut  -  $1.00
PTO Side Oil Seal  -  $4.00      
Flywheel Side Oil Seal  -  $2.50
 
 
Dyna Mounting Bracket  -  $32.00
Dyna Coil Set [2]  -  $125.00
Twin Cylinder Adjustable Timing Plate With Pick Ups - $220.00
Twin Cylinder Adjustable Timing Plate  - $75.00

 

Pertronix Box Digital Rev Limiter - $145.95
DRL300 Inductive RPM Limiter - $115.00
Lakota has used both systems successfully in the 5000 RPM Twin class. 
Stock Kohler Ignition Module - each  -  $60.00
 
 
Alum Timing Pointer Set  -  $20.00
Kohler Command Carb  -  $60.00
    * Drill out jet, Drill & Tap for Bottom Adjuster
* With your acceptable core 
Command Carb Core Change  -  $75.00
Carb Bottom Adjuster  -  $13.00   
Bottom Adjuster Washer - $1.50
Pro Flo 1200 - Re Cast Carb  -  $425.00
* 1.200 Venturi - Alky or Gas

 

Command Bolt On Velocity Stack  - $60.00
    * Increases airflow  -  picks up 2 1/2 hp
    * For on stock carbs - no machining needed 

 

Vertical Shaft Manifold - $121.00
*15CFM more than Horizontal Manifold
5/8" Downdraft Carb Adapter   -   $75.00
    * Lets you put a downdraft carb on a vertical shaft manifold
Carb Gasket - $5.00         

 

Command Two Barrel Manifold Adaptor   -   $70.00
    * Use on Custom or Kohler 2 Barrel Manifold
    * Use with 1.000 or 1.200 Single Cylinder Carb
Steel Intake Manifold Flange Set  -  $10.00
Intake Manifold gasket - set of 2 - $3.00
2 1/2" Manifold Bolt Kit  -  $2.00
Command Two Barrel Manifold  -  $130.00
 
 
Lakota Command 5 1/2" Disc Clutch  -  $449.50
    * 6 pin driver - 5/8" driveshaft heavy duty clu. arm - yellow spring
Lakota Command 6" Disc Clutch  -  $489.50
    * 6 pin driver - 5/8" driveshaft heavy duty clu. arm - yellow spring
Note: add $5.00 to price  when using narrow frame arm
Steel 3 1/2" Drive shaft coupler   -   $34.00
Command Billet Alum Clutch Hub  -  $40.00
Command Clutch Hub Bolt - set of 4$2.00
    * 5/16" for steel flywheel
    * M8 for stock flywheel
 



Command Adjustable Steel Flywheel   -   $275.00

Command Crank Trigger Steel Flywheel   -   $175.00
Hardened Flywheel Key Way - $1.00
Woodruff Flywheel Key Way - $1.00
 
Steel Exhaust Flange Set  -  $18.00
Welded 1 1/8" Exhaust Pipe & Flange Set - $60.00
* Two Pipe Set
Exhaust Flange Stud & Nut Set  -  $3.00
 
 

JE Pistons and Lakota Connecting Rods

Lakota Command Billet Rod (set of 2)  -  $240.00
    * 4.495 for stock cranks 
    * 4.585 - 4.635 - for stroker cranks
Command Insert Rod Bearings - for 2 rods    $65.00

Our JE Pistons include rings, wire clips, and wrist pins.

1.040 Compression Height (set of 2) - $300.00
* 3.031 - 3.051  - 3.268 - 3.270 bore sizes 
* ring package: 1.0mm/1.2mm/2.8mm .669 pin
.945 Compression Height (set of 2) - $290.00
* 3.302 - 3.307 - 3.381 bore sizes 
* ring package: 1.0mm/1.2mm/2.8mm .699 pin
*  with 4.585 rod and stock crank or 30 HP crank 
.945 Compression Height (set of 2)  Gas Ported -  $332.00
* 3.381 bore size 
* ring package: 1.0mm/1.2mm/2.8mm .699 pin
*  with 4.585 rod and stock crank or 30 HP crank
.810 Compression Height (set of 2)  -  $340.00
* 3.302 - 3.381 bore sizes
* ring package: 1.0mm/1.2mm/2.8mm/supp rail .699 pin
*  with 4.585 rod and 3.120 stroker crank
*  with 4.635 rod and 2.940 stroker crank
.810 Compression Height (set of 2) Gas Ported- $390.00
* 3.381 bore size
* ring package: 1.0mm/1.2mm/2.8mm/supp rail .699 pin, skirt coated
.760 Compression Height (set of 2) - $340.00
* 3.302 bore size
* ring package: 1.0mm/1.2mm/2.8mm/supp rail .699 pin
.760 Compression Height (set of 2)
* 3.381 bore size
* ring package: 1.0mm/1.2mm/2.8mm/supp rail, .699 pin
.760 Compression Height (set of 2) - $342.00
* 3.402 bore size
* ring package: 1.0mm/1.2mm/2.8mm/ supp rail .699 pin
.760 Compression Height (set of 2) - $345.00
* 3.422 bore size
* ring package: 1.0mm/1.2mm/2.8mm/supp rail .699 pin
 
**NOTE: .945 - .810 - .760 CH Pistons are .003-.004 undersize to allow for fitting of rings for end gap.
 
JE Command Piston Rings (set of 2)  -  $46.00
    * 3.031 - 3.051 - 3.270 - 3.307 - 3.381 bore sizes
JE Wrist Pin .669  -  $22.00 each
JE Wire Lock .669  -  $1.50 each

 

 
 
Command Cast Cam Grind    $250.00
* with your acceptable core 
Cast Cam Core Charge   -   $50.00
Light Weight Steel Cam Gear    $75.00 
* can be installed on billet or cast cam
Cam Gear Hardware Set  -   $1.00
Command Solid Lifters - set of 4   $56.00
* .011 EDM hole
Command Nut Adjustable Push Rods - set of 4    $55.00
* will work with stock or roller rocker sets
 
 
 
Lakota CNC Ground Command Roller Cam  -  $525.00
Roller Cam Steel Billet  -  $75.00
Roller Cam Needle Bearing  -  $15.00
Command Roller Lifters - set of 4    $147.00

Side Cover Bearing & Oil Seal Kit   -   $45.00
    * side cover needs to be bored
 
 
Command Kohler Valve Cover - includes gasket  $17.00
Breather Reed  -  $1.50          
Breather Reed Retainer  -  $2.50
Breather Filter  -  $1.50
Breather Gasket  -  $7.00
Command Block Crankcase Breather  -  $31.00

Stainless Steel Valves - set of 4    $110.00
    * 7mm - Stk. length - 2  Intake 1.320 & 2 Exhaust 1.170
   
  * 7mm - .297 longer - 2  Intake 1.320 & 2 Exhaust 1.170
   
  * 7mm - Stk. length - 2  Intake 1.450 & 2 Exhaust 1.200
   
  7mm - .297 longer - 2  Intake 1.450 & 2 Exhaust 1.200
   
  * Custom Lengths Available
T
itanium Valves - set of 4   $220.00

 7mm Bronze Guides - set of 4 -  $20.00
 
7mm Intake Valve Seal
   -   $5.25 each
7mm Valve Keeper - set of 8  -  $6.00
 
6mm Bronze Guides -
set of 4  -  $22.00
 
6mm Intake Valve Seal
   -   $4.00 each
6mm Valve Keeper  set of 8 -  $6.00

Valve Spring & Retainer Kit - set of 4   $48.25
   
* 4500 RPM
Valve Spring & Retainer Kit - set of 4   $42.00

      * Open RPM - for with cast cams only
Roller Cam Valve Spring & Retainer Kit - set of 4   $160.00
* 1.750 IH , 230 open, 390# 7mm Ti Retainers - set of 4
Roller Cam Valve Spring & Retainer Kit - set of 4   $164.00
* 1.770 IH , 280 open, 480# 7mm Ti Retainers - set of 4

 

Bolt on 1.5:1 Thru 1.7:1 Roller Rocker Set  -  $190.00
    * will need spacers
Adj. Roller Rocker Set  - 1.5:1 Thru 1.7:1 -  $205.00
   
* will need spacers
Roller Rocker Steel Pedestal - Set of 4  -   $24.00
Steel Pedestal Mount Set -   $50.00
* for stock heads
Adj. Shaft Mount Roller Rocker Set  - 1.5:1 Thru 1.9:1 - $263.00
    * will need spacers
     * for use on MSC recast heads
Valve Cover Spacer Set - 3/4"  -  $36.00
   
* use with roller rockers
Valve Cover Spacer Bolt Kit  -  $2.00
   
* use with spacer set
 
Alloy Head Stud and Nut Kit - set of 8  -  $36.00
Command Copper Head Gasket - set of 2 - $46.00
   
* 18-24 HP - 3.080 bore - 031 - .042 - .062
   
   * 25 HP - 3.300 bore - .031 - .042 - .062
   
   * 25 HP - 3.400 - .031 - .042 - .062
Permatex Copper Head Gasket Spray  -   $10.00
    Note: Install All Copper Head Gaskets with Permatex Copper Spray
4056 Spark Plug - each $2.50
Index Washer set - $2.25
* 3 pack - .043/.051/.064
  
 

Recast Head Porting (Call for Pricing)
Command Head Set Porting - $270.00
   * On your acceptable cores
*Does not Include valves, guides or seats
Command Head Set Valve Job - $75.00 and up
    Does not Include valves, guides or seats
Remove & Install Valve Guide - $15.00 each
    Does not Include guides 
O Ring Command Head Set - $25.00
   
* Includes Wire

 
We Accept Visa, Master Card and Discover.