We Accept Visa, Master Card and Discover
 
Lakota Clutches and Clutch Parts
 
 

Pictured above: 6" Clutch Component Parts

 
 
 Lakota Yellow Spring 6" Clutch - $489.50
Clutch w/ narrow frame arm - $494.50
(5000 V Twin: double 6" recommended)
 
* Clutch Includes: 
6 Pin Lite Weight Alum Driver with Bearing
5/8" Drive Shaft
Yellow Clutch Spring
Lakota Heavy Duty Clutch Arm
Lakota Lite Weight Alum. Bonded Disc
Lakota Steel 6" Pressure Plate Set
Thro Out Bearing
Teaser Spring - Spacer Cup - 2 Split Collars
 
 
 Lakota Yellow Spring 5 1/2" Clutch - $449.50
Clutch w/ narrow frame arm - $454.50
* Clutch Includes: 
6 Pin Lite Weight Alum Driver with Bearing
5/8" Drive Shaft
Yellow Clutch Spring
Lakota Heavy Duty Clutch Arm
Lakota Lite Bonded Disc
Lakota Steel 5 1/2" Pressure Plate Set
Thro Out Bearing
Teaser Spring - Spacer Cup - 2 Split Collars
Lakota Red Spring Bonded Disc Clutch  -  $323.00
    *  wide frame or 582 frame arm
Lakota Red Spring Bonded Disc Clutch  -  $328.00
* with narrow frame clutch arm
Lakota Yellow Spring Bonded Disc Clutch  -  $332.00
* with wide frame or 582 frame clutch arm
Lakota Yellow Spring Bonded Disc Clutch  -  $337.00
* with narrow frame clutch arm
 
 * Our Clutches Include: 
3 Pin Alum Driver with Bearing
5/8" Drive Shaft
Clutch Spring
Lakota Heavy Duty Clutch Arm
Lakota Stock Steel Bonded Disc
Lakota Steel 4 1/2" Pressure Plate Set
Thro Out Bearing
Teaser Spring - Spacer Cup - Split Collar

  
 
Lakota Steel Stock Bonded Clutch Disc  -  $60.00  
* Replaces Stock Disc - for single disc clutches
Lakota Billet Alum Stock Clutch Driver  -  $55.00
* Includes 3 clutch drive pins and bearing
* Replaces Stock Driver
Clutch Driver 3 Pin Kit  -  $3.00
* Replacement pins or add to 3 Pin driver to make it a 6 pin
Replacement Stock Driver Bearing   -   $11.00
* for our alum stock driver
5/8 Stock Drive Shaft - 19 3/16" -  $25.00 
5/8 Steel Drive Shaft Blank  -  $20.00
* No Holes
.250 4 1/2" Steel Pressure Plate Set  -  $47.00 
.188 4 1/2" Steel Pressure Plate Set  -  $47.00
* replaces stock pressure plates
950 lb. Clutch Spring  -  $18.00
1180 lb. Clutch Spring  -  $22.00
Thro Out Bearing  -  $36.00
Thro Out Bearing for narrow frame -  $36.00
Teaser Spring  -  $5.00
Teaser Spring Spacer Cup  -  $9.00
Spiral Roll Pin  -  $1.00
5/8" Split Collar  -  $5.00
Pillow Block Bearing - 5/8"  -  $20.00
 
 
 
Lakota Heavy Duty Clutch Arm   -   $45.00
* Wide frame or 582 frame
Lakota Heavy Duty Clutch Arm   -   $50.00
* Narrow frame w/ hanging bracket
Narrow Frame Clutch Arm Hanging Bracket   -   $5.00
3/8 - 16 Clevis End   -   $11.00
 
582 Frame Clutch Arm Support  -   $45.00
 
 
Steel 5/8" Drive Shaft Coupler - for 5/8 Drive Shafts
* 3" - $32.00
* 3 1/2" - $34.00
* 4" - $36.00
* 4 1/2" - $38.00
    * 5" - $40.00  
* Custom Lengths Available
1" Steel Stock Drive Shaft Coupler  -  $16.00
* replaces 1" stock coupler
 
 
Billet Alum Clutch Hub  -   $30.00
* .625 - for with cast cranks
* .750 - for with steel billet cranks 
Clutch Hub to Flywheel Bolt Kit [2]  -  $1.00 
* As an alternative to using the dowel pin
Driver to Clutch Hub Bolt Kit [4]   -   $2.00
Steel Dowel Pin  -  $0.50
* 1/4"  or  3/8"
Command Billet Alum Clutch Hub  -  $40.00
Command Clutch Hub Bolt  -  $2.00
* Set of 4
Lakota Transmission And
Rear End Parts
 
Dodge Dart Axle and Carrier Kit - $550.00
*includes Alum Dodge Carrier Cups [pictured below] 
and the bearings and seals
 
 
 
 
CNC Alum Dodge Carrier Cups - set of 2  -  $100.00
4 Speed Alum Spacer Kit  -  $25.00
Steel Front Pinion Support  -  $40.00
Steel Front Pinion Bearing Support Cup  -  $45.00
Front Pinion  Bearing   -   $14.75
Steel Top Shaft Bearing Holder  -  $45.00
Rear Pinion Capped Needle Bearing  -  $15.00
Transmission Gear Sets - $120.00
* Top Cluster and Two Bottom Gears
Shifting Fork Set - $125.00
Shifter Detent Spring Set - $7.00
 
 
Heavy Duty Ring and Pinion  -  $395.00
13 tooth Pinion  -  $75.00
* Speeds up Transmission gears about one tooth
Hardened Top Shaft  -  $75.00
Overdrive Set  -  $130.00
* 10% - 16% - 23%
Overdrive Set - $175.00
*26% - 33% - 38% - 43% - 47%
Pinion Bearing, Seal, & Clip Set  -  $20.00
Pinion Bearing  -  $11.50
Pinion Bearing Seal  -  $7.50
Pinion Bearing - .625 ID for 2 Pc. Pinion -
$11.50
Pinion Clip - $1.50
 
Please See The Lakota Racing Command Page For All Command Parts.
 
We Accept Visa, Master Card and Discover.